Begin your trade, your way with us today.
QTP/QBP

Qualified Technical Person (QTP) and Qualified Business Person (QBP)

The Qualified Technical Person (QTP) and Qualified Business Person (QBP) short courses are designed for individuals who are needing to obtain their Electrical Contractors Licence in Queensland. These short courses are for individuals planning on contracting in Queensland, or are needing to renew their licence, and covers the Electrical Safety Office (ESO) requirements.

Elecrtrician installing wiring in the ceiling

Qualified Technical Person (QTP) 

The Qualified Technical Person (QTP) short course assists in providing knowledge and skills to identify hazards, follow safe work practices to control risks, and check compliance and safety through the testing of electrical installations, and report on defects found. 

Prepare for, conduct, and act and report on findings of compliance inspections of single phase low voltage (LV) electrical installation and low voltage (LV) electrical installation with demand exceeding 100 ampere (A) per phase. 

Qualified Business Person (QBP) 

The Qualified Business Person (QBP) short course assists in providing knowledge and skills to follow work health and safety regulations and codes of practices in the electrotechnology workplace. 

Identify legal and risk management requirements and develop and implement procedures, policies and plans to ensure compliance within an electrical contracting business. 

Successful completion of this training program will allow QTP’s and QBP’s to apply / renew their QTP/QBP status under the requirements of the Electrical Safety Regulation 2013. 

Upcoming Workshops

Name Date Time Location Available Spaces Cost
Short Course – FFS QTP/QBP (WKS) 16 – 20 December 2024 08:00 am – 04:00 pm Banyo Campus 5 $3,315.50
Short Course – FFS QTP/QBP (WKS) 3 – 7 February 2025 08:00 am – 04:00 pm Banyo Campus 5 $3,315.50
Short Course – FFS QTP/QBP (WKS) 17 – 21 March 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 28 April – 2 May 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 9 – 13 June 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 21 – 25 July 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 1 – 5 September 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 13 – 17 October 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 24 – 28 November 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50

Qualified Technical Person (QTP):
UEEEL0002: Apply currency of safe working practices and compliance verification of electrical installations
UEEEL0030: Conduct compliance inspection of single-phase LV electrical installations
UEEEL0029: Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase

Qualified Business Person (QBP):
UEECD0007: Apply Occupational Health and Safety regulations, codes and practices in the workplace, and ** NOTE
(previously UEENEEE101A)
UEEEL0040: Develop compliance policies and plans to conduct an electrical contracting business
BSBESB402: Establish legal and risk management requirements of small business or approved equivalent (completed within
the last three years)

 

Enquire Now

This field is for validation purposes and should be left unchanged.

This course operates on a rolling enrolment basis, meaning there are no fixed start or end dates. You can begin your studies at any time that suits you, and progress through the course at your own pace.

Under Australian Training standards RTO’s in Australian cannot collect more than $1500 in prepaid fees from individual students to protect the financial interests of students. To comply with this requirement, the following payment schedule will apply upon your enrolment.

Fee For Service

Option 1 – 5-day classroom based training

Option 2 – Blended – Online theory (self-paced) via Learning Management System and 1 day practical training and assessment completed onsite at our Banyo campus once all online theory has been completed. Please note course must be completed within 6 months of enrolment.

Blended – Online theory (self-paced) via Learning Management System and 2 day practical training and assessment completed onsite at our campus once all online theory has been completed. 

 

Delivery Location 

  • Online 
  • Brisbane (Banyo Campus)
     

During the entire program you will have access to your trainer via phone or email during normal business hours, should you have any questions throughout completing the course. 

Duration 

Up to 6 months  

Requirements for completion of this qualification

Units of Competency 

To be awarded both the Qualified Technical Person (QTP) and Qualified Business Person (QBP) short courses, competency must be achieved in 6 units of competency: 

  • Three (3) Qualified Technical Person (QTP) units 
  • Three (3) Qualified Business Person (QBP) units 

Qualified Technical Person (QTP) 

  • UEEEL0002 Apply currency of safe working practices and compliance verification of electrical installations 
  • UEEEL0030 Conduct compliance inspection of single phase LV electrical installations 
  • UEEEL0029 Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase 

Qualified Business Person (QBP) 

  • UEECD0007 Apply work health and safety regulations, codes and practices in the workplace 
  • UEEEL0040 Develop compliance policies and plans to conduct an electrical contracting business 
  • BSBESB402 Establish legal and risk management requirements of new business ventures 

You must hold at least a current Queensland electrical mechanic work licence when applying to the Queensland Safety Office for the Contractor licence. 

WorkSafe Queensland has more information around the requirements to have this endorsement added to an Electrical Contractor Licence. 

On successful completion, Statement of Attainment will be issued to enable an Electrical Contractor to nominate a QTP and QBP on their Queensland Electrical Contractors Licence. 

Pre-requisite 

Pre-requisites for a Qualified Technical Person (QTP) 

QTPs must hold a current Queensland electrical work licence and must have held that licence for at least two years. People who have not held their Queensland licence for more than two years will need to provide evidence of previous experience and competence in the electrical industry. This may include having previously held an interstate or New Zealand licence or overseas experience. 

QTP nominees who cannot provide two years experience may be eligible as a QTP on an electrical contractor licence with a reduced scope of work (e.g. an electrical contractor licence restricted to electrical equipment maintenance work). 

Pre-requisite Units required to achieve the UEEEL0030: 

UEECD0007, UEECD0019, UEECD0020, UEECD0051, UEECD0016, UEEEL0003, UEEEL0020, UEEEL0039, UEEEL0023, UEEEL0018, UEEEL0005, UEEEL0019, UEEEL0021, UEEEL0014, UEEEL0008, UEEEL0009, UEEEL0010, UEEEL0024, UEEEL0025, UEEEL0012 and UEECD0043 

or 

UEECD0044, UEECD0046 

Pre-requisite Units required to achieve the UEEEL0029: 

UEECD0007, UEECD0019, UEECD0020, UEECD0051, UEECD0016, UEEEL0003, UEEEL0020, UEEEL0039, UEEEL0023, UEEEL0018, UEEEL0005, UEEEL0030, UEEEL0019, UEEEL0021, UEEEL0014, UEEEL0008, UEEEL0009, UEEEL0010, UEEEL0024, UEEEL0025, UEEEL0012, and UEECD0043 

or 

UEECD0044, UEECD0046 

 

Pre-requisites for a Qualified Business Person (QBP) 

There are no pre-requisites for entry into this course. 

 

Resources 

Recommended | Access to AS/NZS 3000 (known as the Electrical Wiring Rules); AS/NZS 3018, AS/NZS 3012, AS/NZS 3017, AS/NZS 3019. 

Access to a computer/laptop and internet, a video and audio recording device (e.g. smart phone or web cam) and current email address.   

It is requested that students provide their own: 

  • Calibrated multimeter 
  • An insulation tester with 250v, and 500v minimum ranges. 
  • Hand tools such as; 
  • Screwdrivers – slotted and Philips 
  • Pliers 
  • Side cutters 

These above tools can be provided for use at training if required. 

Students must provide their own Australian Standards (Paper or digital formats acceptable) and PPE such as Safety Glasses, Safety Boots and Gloves. 

Elecrtrician installing wiring in the ceiling

Upcoming Workshops

Name Date Time Location Available Spaces Cost
Short Course – FFS QTP/QBP (WKS) 16 – 20 December 2024 08:00 am – 04:00 pm Banyo Campus 5 $3,315.50
Short Course – FFS QTP/QBP (WKS) 3 – 7 February 2025 08:00 am – 04:00 pm Banyo Campus 5 $3,315.50
Short Course – FFS QTP/QBP (WKS) 17 – 21 March 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 28 April – 2 May 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 9 – 13 June 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 21 – 25 July 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 1 – 5 September 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 13 – 17 October 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 24 – 28 November 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50

Qualified Technical Person (QTP):
UEEEL0002: Apply currency of safe working practices and compliance verification of electrical installations
UEEEL0030: Conduct compliance inspection of single-phase LV electrical installations
UEEEL0029: Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase

Qualified Business Person (QBP):
UEECD0007: Apply Occupational Health and Safety regulations, codes and practices in the workplace, and ** NOTE
(previously UEENEEE101A)
UEEEL0040: Develop compliance policies and plans to conduct an electrical contracting business
BSBESB402: Establish legal and risk management requirements of small business or approved equivalent (completed within
the last three years)

 

Upcoming Workshops

Name Date Time Location Available Spaces Cost
Short Course – FFS QTP/QBP (WKS) 16 – 20 December 2024 08:00 am – 04:00 pm Banyo Campus 5 $3,315.50
Short Course – FFS QTP/QBP (WKS) 3 – 7 February 2025 08:00 am – 04:00 pm Banyo Campus 5 $3,315.50
Short Course – FFS QTP/QBP (WKS) 17 – 21 March 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 28 April – 2 May 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 9 – 13 June 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 21 – 25 July 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 1 – 5 September 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 13 – 17 October 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 24 – 28 November 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50

Qualified Technical Person (QTP):
UEEEL0002: Apply currency of safe working practices and compliance verification of electrical installations
UEEEL0030: Conduct compliance inspection of single-phase LV electrical installations
UEEEL0029: Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase

Qualified Business Person (QBP):
UEECD0007: Apply Occupational Health and Safety regulations, codes and practices in the workplace, and ** NOTE
(previously UEENEEE101A)
UEEEL0040: Develop compliance policies and plans to conduct an electrical contracting business
BSBESB402: Establish legal and risk management requirements of small business or approved equivalent (completed within
the last three years)

 

Enquire Now

This field is for validation purposes and should be left unchanged.

This course operates on a rolling enrolment basis, meaning there are no fixed start or end dates. You can begin your studies at any time that suits you, and progress through the course at your own pace.

Under Australian Training standards RTO’s in Australian cannot collect more than $1500 in prepaid fees from individual students to protect the financial interests of students. To comply with this requirement, the following payment schedule will apply upon your enrolment.

Fee For Service

Option 1 – 5-day classroom based training

Option 2 – Blended – Online theory (self-paced) via Learning Management System and 1 day practical training and assessment completed onsite at our Banyo campus once all online theory has been completed. Please note course must be completed within 6 months of enrolment.

Blended – Online theory (self-paced) via Learning Management System and 2 day practical training and assessment completed onsite at our campus once all online theory has been completed. 

 

Delivery Location 

  • Online 
  • Brisbane (Banyo Campus)
     

During the entire program you will have access to your trainer via phone or email during normal business hours, should you have any questions throughout completing the course. 

Duration 

Up to 6 months  

Requirements for completion of this qualification

Units of Competency 

To be awarded both the Qualified Technical Person (QTP) and Qualified Business Person (QBP) short courses, competency must be achieved in 6 units of competency: 

  • Three (3) Qualified Technical Person (QTP) units 
  • Three (3) Qualified Business Person (QBP) units 

Qualified Technical Person (QTP) 

  • UEEEL0002 Apply currency of safe working practices and compliance verification of electrical installations 
  • UEEEL0030 Conduct compliance inspection of single phase LV electrical installations 
  • UEEEL0029 Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase 

Qualified Business Person (QBP) 

  • UEECD0007 Apply work health and safety regulations, codes and practices in the workplace 
  • UEEEL0040 Develop compliance policies and plans to conduct an electrical contracting business 
  • BSBESB402 Establish legal and risk management requirements of new business ventures 

You must hold at least a current Queensland electrical mechanic work licence when applying to the Queensland Safety Office for the Contractor licence. 

WorkSafe Queensland has more information around the requirements to have this endorsement added to an Electrical Contractor Licence. 

On successful completion, Statement of Attainment will be issued to enable an Electrical Contractor to nominate a QTP and QBP on their Queensland Electrical Contractors Licence. 

Pre-requisite 

Pre-requisites for a Qualified Technical Person (QTP) 

QTPs must hold a current Queensland electrical work licence and must have held that licence for at least two years. People who have not held their Queensland licence for more than two years will need to provide evidence of previous experience and competence in the electrical industry. This may include having previously held an interstate or New Zealand licence or overseas experience. 

QTP nominees who cannot provide two years experience may be eligible as a QTP on an electrical contractor licence with a reduced scope of work (e.g. an electrical contractor licence restricted to electrical equipment maintenance work). 

Pre-requisite Units required to achieve the UEEEL0030: 

UEECD0007, UEECD0019, UEECD0020, UEECD0051, UEECD0016, UEEEL0003, UEEEL0020, UEEEL0039, UEEEL0023, UEEEL0018, UEEEL0005, UEEEL0019, UEEEL0021, UEEEL0014, UEEEL0008, UEEEL0009, UEEEL0010, UEEEL0024, UEEEL0025, UEEEL0012 and UEECD0043 

or 

UEECD0044, UEECD0046 

Pre-requisite Units required to achieve the UEEEL0029: 

UEECD0007, UEECD0019, UEECD0020, UEECD0051, UEECD0016, UEEEL0003, UEEEL0020, UEEEL0039, UEEEL0023, UEEEL0018, UEEEL0005, UEEEL0030, UEEEL0019, UEEEL0021, UEEEL0014, UEEEL0008, UEEEL0009, UEEEL0010, UEEEL0024, UEEEL0025, UEEEL0012, and UEECD0043 

or 

UEECD0044, UEECD0046 

 

Pre-requisites for a Qualified Business Person (QBP) 

There are no pre-requisites for entry into this course. 

 

Resources 

Recommended | Access to AS/NZS 3000 (known as the Electrical Wiring Rules); AS/NZS 3018, AS/NZS 3012, AS/NZS 3017, AS/NZS 3019. 

Access to a computer/laptop and internet, a video and audio recording device (e.g. smart phone or web cam) and current email address.   

It is requested that students provide their own: 

  • Calibrated multimeter 
  • An insulation tester with 250v, and 500v minimum ranges. 
  • Hand tools such as; 
  • Screwdrivers – slotted and Philips 
  • Pliers 
  • Side cutters 

These above tools can be provided for use at training if required. 

Students must provide their own Australian Standards (Paper or digital formats acceptable) and PPE such as Safety Glasses, Safety Boots and Gloves. 

Elecrtrician installing wiring in the ceiling

Upcoming Workshops

Name Date Time Location Available Spaces Cost
Short Course – FFS QTP/QBP (WKS) 16 – 20 December 2024 08:00 am – 04:00 pm Banyo Campus 5 $3,315.50
Short Course – FFS QTP/QBP (WKS) 3 – 7 February 2025 08:00 am – 04:00 pm Banyo Campus 5 $3,315.50
Short Course – FFS QTP/QBP (WKS) 17 – 21 March 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 28 April – 2 May 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 9 – 13 June 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 21 – 25 July 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 1 – 5 September 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 13 – 17 October 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50
Short Course – FFS QTP/QBP (WKS) 24 – 28 November 2025 08:00 am – 04:00 pm Banyo Campus 6 $3,315.50

Qualified Technical Person (QTP):
UEEEL0002: Apply currency of safe working practices and compliance verification of electrical installations
UEEEL0030: Conduct compliance inspection of single-phase LV electrical installations
UEEEL0029: Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase

Qualified Business Person (QBP):
UEECD0007: Apply Occupational Health and Safety regulations, codes and practices in the workplace, and ** NOTE
(previously UEENEEE101A)
UEEEL0040: Develop compliance policies and plans to conduct an electrical contracting business
BSBESB402: Establish legal and risk management requirements of small business or approved equivalent (completed within
the last three years)

 

Up to 6 months 

More automative courses

No Available Products Found.

Explore other industries

What is a Card Verification Number (CVN)?

This is a 3 or 4 digit code that provides extra security for online payments. For Visa, Mastercard and Diners, this is a 3 digit number usually printed on the back of the signature panel. For Amex, this is the 4 digit number on the front of the card above the embossed card number.