Units of Competency

To be awarded this short course, competency must be achieved in 3 units of competency:

• Three (3) units
• UEEEL0002 Apply currency of safe working practices and compliance verification of electrical installations
• UEEEL0030 Conduct compliance inspection of single phase LV electrical installations
• UEEEL0029 Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase

On successful completion, Statement of Attainment will be issued to enable an Electrical Contractor to nominate a QTP on their Queensland Electrical Contractors Licence.

Pre-requisite

Eligibility requirements for a Qualified Technical Person (QTP)

QTPs must hold a current Queensland electrical work licence and must have held that licence for at least two years. People who have not held their Queensland licence for more than two years will need to provide evidence of previous experience and competence in the electrical industry. This may include having previously held an interstate or New Zealand licence or overseas experience.

QTP nominees who cannot provide two years experience may be eligible as a QTP on an electrical contractor licence with a reduced scope of work (e.g. an electrical contractor licence restricted to electrical equipment maintenance work).

Pre-requisite Units required to achieve the UEEEL0030:

UEECD0007, UEECD0019, UEECD0020, UEECD0051, UEECD0016, UEEEL0003, UEEEL0020, UEEEL0039, UEEEL0023, UEEEL0018, UEEEL0005, UEEEL0019, UEEEL0021, UEEEL0014, UEEEL0008, UEEEL0009, UEEEL0010, UEEEL0024, UEEEL0025, UEEEL0012 and UEECD0043
or
UEECD0044, UEECD0046

Pre-requisite Units required to achieve the UEEEL0029:

UEECD0007, UEECD0019, UEECD0020, UEECD0051, UEECD0016, UEEEL0003, UEEEL0020, UEEEL0039, UEEEL0023, UEEEL0018, UEEEL0005, UEEEL0030, UEEEL0019, UEEEL0021, UEEEL0014, UEEEL0008, UEEEL0009, UEEEL0010, UEEEL0024, UEEEL0025, UEEEL0012, and UEECD0043
or
UEECD0044, UEECD0046

Resources

Recommended | Access to AS/NZS 3000 (known as the Electrical Wiring Rules); AS/NZS 3018, AS/NZS 3012, AS/NZS 3017, AS/NZS 3019.
Access to a computer/laptop and internet, a video and audio recording device (e.g. smart phone or web cam) and current email address.
It is requested that students provide their own:

• Calibrated multimeter
• An insulation tester with 250v, and 500v minimum ranges.
• Hand tools such as;
  • Screwdrivers – slotted and Philips
  • Pliers
  • Side cutters

These above tools can be provided for use at training if required.

Students must provide their own Australian Standards (Paper or digital formats acceptable) and PPE such as Safety Glasses, Safety Boots and Gloves.