QBP

Qualified Business Person (QBP)

The Qualified Business Person (QBP) short course covers the knowledge and skills to follow and comply with work health and safety regulations and codes of practices, legal requirements and industry standards within the Electrotechnology industry.

Qualified electrician looking confident

$980.00

The Qualified Business Person (QBP) short course assists in providing knowledge and skills to follow work health and safety regulations and codes of practices in the electrotechnology workplace. 

Identify legal and risk management requirements and develop and implement procedures, policies and plans to ensure compliance within an electrical contracting business.  

For more information about the role of Qualified Business Person (QBP) please visit the Worksafe Queensland website. 

Successful completion of this training program will allow QBP’s to apply / renew their QBP status under the requirements of the Electrical Safety Regulation 2013. 

Nationally Recognised Training Logo

Fee For Service (FFS)

Qualified Business Person (QBP): $980.00
UEECD0007: $330.00
UEEEL0040: $450.00
BSBESB402: $200.00

$980.00

Enquire Now

Blended – Online theory (self-paced) via Learning Management System and 1 day practical training and assessment completed onsite at our campus once all online theory has been completed.

Delivery Location

  • Online
  • Banyo Campus

During the entire program you will have access to your trainer via phone or email during normal business hours, should you have any questions throughout completing the course.

Duration 

Up to 12 months 

Requirements for completion of this qualification

Units of Competency

To be awarded this short course, competency must be achieved in 3 units of competency:

  • Three (3) units
  • UEECD0007 Apply work health and safety regulations, codes and practices in the workplace
  • UEEEL0040 Develop compliance policies and plans to conduct an electrical contracting business
  • BSBESB402 Establish legal and risk management requirements of new business ventures

WorkSafe Queensland has more information around the requirements to have this endorsement added to an Electrical Contractor Licence.

On successful completion, Statement of Attainment will be issued to enable an Electrical Contractor to nominate QBP on their Queensland Electrical Contractors Licence.

Pre-requisite

There are no pre-requisites for entry into this course.

Resources

Recommended | Access to AS/NZS 3000 (known as the Electrical Wiring Rules); AS/NZS 3018, AS/NZS 3012, AS/NZS 3017, AS/NZS 3019.

Access to a computer/laptop and internet, a video and audio recording device (e.g. smart phone or web cam) and current email address.

It is requested that students provide their own:

  • Calibrated multimeter
  • An insulation tester with 250v, and 500v minimum ranges.
  • Hand tools such as;
    • Screwdrivers – slotted and Philips
    • Pliers
    • Side cutters

These above tools can be provided for use at training if required.

Students must provide their own Australian Standards (Paper or digital formats acceptable) and PPE such as Safety Glasses, Safety Boots and Gloves.

$980.00

Fee For Service (FFS)

Qualified Business Person (QBP): $980.00
UEECD0007: $330.00
UEEEL0040: $450.00
BSBESB402: $200.00

$980.00

Fee For Service (FFS)

Qualified Business Person (QBP): $980.00
UEECD0007: $330.00
UEEEL0040: $450.00
BSBESB402: $200.00

Enquire Now

Blended – Online theory (self-paced) via Learning Management System and 1 day practical training and assessment completed onsite at our campus once all online theory has been completed.

Delivery Location

  • Online
  • Banyo Campus

During the entire program you will have access to your trainer via phone or email during normal business hours, should you have any questions throughout completing the course.

Duration 

Up to 12 months 

Requirements for completion of this qualification

Units of Competency

To be awarded this short course, competency must be achieved in 3 units of competency:

  • Three (3) units
  • UEECD0007 Apply work health and safety regulations, codes and practices in the workplace
  • UEEEL0040 Develop compliance policies and plans to conduct an electrical contracting business
  • BSBESB402 Establish legal and risk management requirements of new business ventures

WorkSafe Queensland has more information around the requirements to have this endorsement added to an Electrical Contractor Licence.

On successful completion, Statement of Attainment will be issued to enable an Electrical Contractor to nominate QBP on their Queensland Electrical Contractors Licence.

Pre-requisite

There are no pre-requisites for entry into this course.

Resources

Recommended | Access to AS/NZS 3000 (known as the Electrical Wiring Rules); AS/NZS 3018, AS/NZS 3012, AS/NZS 3017, AS/NZS 3019.

Access to a computer/laptop and internet, a video and audio recording device (e.g. smart phone or web cam) and current email address.

It is requested that students provide their own:

  • Calibrated multimeter
  • An insulation tester with 250v, and 500v minimum ranges.
  • Hand tools such as;
    • Screwdrivers – slotted and Philips
    • Pliers
    • Side cutters

These above tools can be provided for use at training if required.

Students must provide their own Australian Standards (Paper or digital formats acceptable) and PPE such as Safety Glasses, Safety Boots and Gloves.

$980.00

Fee For Service (FFS)

Qualified Business Person (QBP): $980.00
UEECD0007: $330.00
UEEEL0040: $450.00
BSBESB402: $200.00

Up to 12 months

More automative courses

Electrician fixing telecommunications cabling
Certificate III in Electrotechnology Electrician ..

This qualification fulfils the technical requirements for you to apply for your electrical contractor licence an ..

Electrician fixing telecommunications cabling
Basic Open Cabler Registration Skill Set ..

The Basic Open Cabler Registration Skill Set is for new or existing workers in the telecommunications industry w ..

Elecrtrician installing wiring in the ceiling
Qualified Technical Person (QTP) and Qualified Business Person (QBP) ..

The Qualified Technical Person (QTP) and Qualified Business Person (QBP) short courses are designed for individu ..

Qualified Electrician performing a safety check
Qualified Technical Person (QTP) ..

The Qualified Technical Person (QTP) short course covers the knowledge and skills to follow work health and safe ..

Person conducting an electrical test and tag
Electrical Safety Testing of Electrical Cord Connected Equipment and Cord Assemblies Skill ..

This Skill Set is designed for those individuals wishing to undertake the testing, tagging and reporting of port ..

Two people testing electrical equipment
Restricted Electrical Licence (QLD) ..

A Restricted Electrical Licence authorises the holder to perform electrical work of a particular type stated on ..

Electrical Trainer showing Apprentice
Course in Electrician – Minimum Australian Context Gap ..

The knowledge and skills of many overseas workers can be very high, but there are differences in the way the tec ..

An Apprentice working on an electrical box
Certificate III in Electrical Fitting ..

The Certificate III in Electrical Fitting is a Trade-level qualification which provides the knowledge and skills ..

Electrotechnology students listening to their trainer
Certificate II in Electrotechnology (Career Start) ..

The Certificate II in Electrotechnology assists students in gaining the basic knowledge and skills required for ..

Explore other industries

What is a Card Verification Number (CVN)?

This is a 3 or 4 digit code that provides extra security for online payments. For Visa, Mastercard and Diners, this is a 3 digit number usually printed on the back of the signature panel. For Amex, this is the 4 digit number on the front of the card above the embossed card number.