Qualified Technical Person (QTP)

The Qualified Technical Person (QTP) short course covers the knowledge and skills to follow work health and safety requirements when preparing for, conducting and reporting findings of a compliance inspection.

Qualified Electrician performing a safety check

$1,250.00

In Queensland, all electrical work performed by a licensed electrical contractor must be performed or supervised by a qualified technical person (QTP) who is endorsed on the licence. The QTP must be either an employee of the electrical contractor, member of the partnership, or an executive officer of the corporation.

The Qualified Technical Person (QTP) short course assists in providing knowledge and skills to identify hazards, follow safe work practices to control risks, and check compliance and safety through the testing of electrical installations, and report on defects found.

Prepare for, conduct, and act and report on findings of compliance inspections of single phase low voltage (LV) electrical installation and low voltage (LV) electrical installation with demand exceeding 100 ampere (A) per phase.

For more information about the role of Qualified Technical Person (QTP) please visit the Worksafe Queensland website.

Successful completion of this training program will allow QTP’s to apply / renew their QTP status under the requirements of the Electrical Safety Regulation 2013.

Nationally Recognised Training Logo

Cost

Fee For Service (FFS)

Qualified Technical Person (QTP):

$1,250.00
UEEEL0002: $450.00
UEEEL0030: $400.00
UEEEL0029: $400.00

$1,250.00

Enquire Now

Fee For Service

Blended – Online theory (self-paced) via Learning Management System and 2 day practical training and assessment completed onsite at our campus once all online theory has been completed.

Delivery Location

During the entire program you will have access to your trainer via phone or email during normal business hours, should you have any questions throughout completing the course.

Duration
Up to 12 months

Requirements for completion of this qualification

Units of Competency

To be awarded this short course, competency must be achieved in 3 units of competency:

  • Three (3) units
  • UEEEL0002 Apply currency of safe working practices and compliance verification of electrical installations
  • UEEEL0030 Conduct compliance inspection of single phase LV electrical installations
  • UEEEL0029 Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase

On successful completion, Statement of Attainment will be issued to enable an Electrical Contractor to nominate a QTP on their Queensland Electrical Contractors Licence.

Pre-requisite

Eligibility requirements for a Qualified Technical Person (QTP)

QTPs must hold a current Queensland electrical work licence and must have held that licence for at least two years. People who have not held their Queensland licence for more than two years will need to provide evidence of previous experience and competence in the electrical industry. This may include having previously held an interstate or New Zealand licence or overseas experience.

QTP nominees who cannot provide two years experience may be eligible as a QTP on an electrical contractor licence with a reduced scope of work (e.g. an electrical contractor licence restricted to electrical equipment maintenance work).

Pre-requisite Units required to achieve the UEEEL0030:

UEECD0007, UEECD0019, UEECD0020, UEECD0051, UEECD0016, UEEEL0003, UEEEL0020, UEEEL0039, UEEEL0023, UEEEL0018, UEEEL0005, UEEEL0019, UEEEL0021, UEEEL0014, UEEEL0008, UEEEL0009, UEEEL0010, UEEEL0024, UEEEL0025, UEEEL0012 and UEECD0043
or
UEECD0044, UEECD0046

Pre-requisite Units required to achieve the UEEEL0029:

UEECD0007, UEECD0019, UEECD0020, UEECD0051, UEECD0016, UEEEL0003, UEEEL0020, UEEEL0039, UEEEL0023, UEEEL0018, UEEEL0005, UEEEL0030, UEEEL0019, UEEEL0021, UEEEL0014, UEEEL0008, UEEEL0009, UEEEL0010, UEEEL0024, UEEEL0025, UEEEL0012, and UEECD0043
or
UEECD0044, UEECD0046

Resources

Recommended | Access to AS/NZS 3000 (known as the Electrical Wiring Rules); AS/NZS 3018, AS/NZS 3012, AS/NZS 3017, AS/NZS 3019.
Access to a computer/laptop and internet, a video and audio recording device (e.g. smart phone or web cam) and current email address.
It is requested that students provide their own:

  • Calibrated multimeter
  • An insulation tester with 250v, and 500v minimum ranges.
  • Hand tools such as;
    • Screwdrivers – slotted and Philips
    • Pliers
    • Side cutters

These above tools can be provided for use at training if required.

Students must provide their own Australian Standards (Paper or digital formats acceptable) and PPE such as Safety Glasses, Safety Boots and Gloves.

$1,250.00

Cost

Fee For Service (FFS)

Qualified Technical Person (QTP):

$1,250.00
UEEEL0002: $450.00
UEEEL0030: $400.00
UEEEL0029: $400.00

$1,250.00

Cost

Fee For Service (FFS)

Qualified Technical Person (QTP):

$1,250.00
UEEEL0002: $450.00
UEEEL0030: $400.00
UEEEL0029: $400.00

Enquire Now

Fee For Service

Blended – Online theory (self-paced) via Learning Management System and 2 day practical training and assessment completed onsite at our campus once all online theory has been completed.

Delivery Location

During the entire program you will have access to your trainer via phone or email during normal business hours, should you have any questions throughout completing the course.

Duration
Up to 12 months

Requirements for completion of this qualification

Units of Competency

To be awarded this short course, competency must be achieved in 3 units of competency:

  • Three (3) units
  • UEEEL0002 Apply currency of safe working practices and compliance verification of electrical installations
  • UEEEL0030 Conduct compliance inspection of single phase LV electrical installations
  • UEEEL0029 Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase

On successful completion, Statement of Attainment will be issued to enable an Electrical Contractor to nominate a QTP on their Queensland Electrical Contractors Licence.

Pre-requisite

Eligibility requirements for a Qualified Technical Person (QTP)

QTPs must hold a current Queensland electrical work licence and must have held that licence for at least two years. People who have not held their Queensland licence for more than two years will need to provide evidence of previous experience and competence in the electrical industry. This may include having previously held an interstate or New Zealand licence or overseas experience.

QTP nominees who cannot provide two years experience may be eligible as a QTP on an electrical contractor licence with a reduced scope of work (e.g. an electrical contractor licence restricted to electrical equipment maintenance work).

Pre-requisite Units required to achieve the UEEEL0030:

UEECD0007, UEECD0019, UEECD0020, UEECD0051, UEECD0016, UEEEL0003, UEEEL0020, UEEEL0039, UEEEL0023, UEEEL0018, UEEEL0005, UEEEL0019, UEEEL0021, UEEEL0014, UEEEL0008, UEEEL0009, UEEEL0010, UEEEL0024, UEEEL0025, UEEEL0012 and UEECD0043
or
UEECD0044, UEECD0046

Pre-requisite Units required to achieve the UEEEL0029:

UEECD0007, UEECD0019, UEECD0020, UEECD0051, UEECD0016, UEEEL0003, UEEEL0020, UEEEL0039, UEEEL0023, UEEEL0018, UEEEL0005, UEEEL0030, UEEEL0019, UEEEL0021, UEEEL0014, UEEEL0008, UEEEL0009, UEEEL0010, UEEEL0024, UEEEL0025, UEEEL0012, and UEECD0043
or
UEECD0044, UEECD0046

Resources

Recommended | Access to AS/NZS 3000 (known as the Electrical Wiring Rules); AS/NZS 3018, AS/NZS 3012, AS/NZS 3017, AS/NZS 3019.
Access to a computer/laptop and internet, a video and audio recording device (e.g. smart phone or web cam) and current email address.
It is requested that students provide their own:

  • Calibrated multimeter
  • An insulation tester with 250v, and 500v minimum ranges.
  • Hand tools such as;
    • Screwdrivers – slotted and Philips
    • Pliers
    • Side cutters

These above tools can be provided for use at training if required.

Students must provide their own Australian Standards (Paper or digital formats acceptable) and PPE such as Safety Glasses, Safety Boots and Gloves.

$1,250.00

Cost

Fee For Service (FFS)

Qualified Technical Person (QTP):

$1,250.00
UEEEL0002: $450.00
UEEEL0030: $400.00
UEEEL0029: $400.00

Up to 12 months

More automative courses

Electrician fixing telecommunications cabling
Certificate III in Electrotechnology Electrician ..

This qualification fulfils the technical requirements for you to apply for your electrical contractor licence an ..

Electrician fixing telecommunications cabling
Basic Open Cabler Registration Skill Set ..

The Basic Open Cabler Registration Skill Set is for new or existing workers in the telecommunications industry w ..

Elecrtrician installing wiring in the ceiling
Qualified Technical Person (QTP) and Qualified Business Person (QBP) ..

The Qualified Technical Person (QTP) and Qualified Business Person (QBP) short courses are designed for individu ..

Qualified electrician looking confident
Qualified Business Person (QBP) ..

The Qualified Business Person (QBP) short course covers the knowledge and skills to follow and comply with work ..

Person conducting an electrical test and tag
Electrical Safety Testing of Electrical Cord Connected Equipment and Cord Assemblies Skill ..

This Skill Set is designed for those individuals wishing to undertake the testing, tagging and reporting of port ..

Two people testing electrical equipment
Restricted Electrical Licence (QLD) ..

A Restricted Electrical Licence authorises the holder to perform electrical work of a particular type stated on ..

Electrical Trainer showing Apprentice
Course in Electrician – Minimum Australian Context Gap ..

The knowledge and skills of many overseas workers can be very high, but there are differences in the way the tec ..

An Apprentice working on an electrical box
Certificate III in Electrical Fitting ..

The Certificate III in Electrical Fitting is a Trade-level qualification which provides the knowledge and skills ..

Electrotechnology students listening to their trainer
Certificate II in Electrotechnology (Career Start) ..

The Certificate II in Electrotechnology assists students in gaining the basic knowledge and skills required for ..

Explore other industries

What is a Card Verification Number (CVN)?

This is a 3 or 4 digit code that provides extra security for online payments. For Visa, Mastercard and Diners, this is a 3 digit number usually printed on the back of the signature panel. For Amex, this is the 4 digit number on the front of the card above the embossed card number.