Begin your trade, your way with us today.
Menu
The Qualified Business Person (QBP) short course covers the knowledge and skills to follow and comply with work health and safety regulations and codes of practices, legal requirements and industry standards within the Electrotechnology industry.
$980.00
The Qualified Business Person (QBP) short course assists in providing knowledge and skills to follow work health and safety regulations and codes of practices in the electrotechnology workplace.Â
Identify legal and risk management requirements and develop and implement procedures, policies and plans to ensure compliance within an electrical contracting business. Â
For more information about the role of Qualified Business Person (QBP) please visit the Worksafe Queensland website.Â
Successful completion of this training program will allow QBP’s to apply / renew their QBP status under the requirements of the Electrical Safety Regulation 2013.Â
Total for the 3 QBP units
Qualified Business Person (QBP): $1695
UEECD0007: Apply Occupational Health and Safety regulations, codes and practices in the workplace, and ** NOTE (previously UEENEEE101A)
UEEEL0040: Develop compliance policies and plans to conduct an electrical contracting business
BSBESB402: Establish legal and risk management requirements of small business or approved equivalent (completed within the last three years)
$980.00
Fee For Service
QBP
Fee For Service Option 1 – 2-day classroom-based training Option 2 – Blended – Online theory (self-paced) via Learning Management System. Please note course must be completed within 12 months of enrolment.
Blended – Online theory (self-paced) via Learning Management System and 1 day practical training and assessment completed onsite at our campus once all online theory has been completed.
Delivery Location
During the entire program you will have access to your trainer via phone or email during normal business hours, should you have any questions throughout completing the course.
DurationÂ
Up to 12 monthsÂ
Units of Competency
To be awarded this short course, competency must be achieved in 3 units of competency:
WorkSafe Queensland has more information around the requirements to have this endorsement added to an Electrical Contractor Licence.
On successful completion, Statement of Attainment will be issued to enable an Electrical Contractor to nominate QBP on their Queensland Electrical Contractors Licence.
Pre-requisite
There are no pre-requisites for entry into this course.
Resources
Recommended | Access to AS/NZS 3000 (known as the Electrical Wiring Rules); AS/NZS 3018, AS/NZS 3012, AS/NZS 3017, AS/NZS 3019.
Access to a computer/laptop and internet, a video and audio recording device (e.g. smart phone or web cam) and current email address.
It is requested that students provide their own:
These above tools can be provided for use at training if required.
Students must provide their own Australian Standards (Paper or digital formats acceptable) and PPE such as Safety Glasses, Safety Boots and Gloves.
$980.00
Total for the 3 QBP units
Qualified Business Person (QBP): $1695
UEECD0007: Apply Occupational Health and Safety regulations, codes and practices in the workplace, and ** NOTE (previously UEENEEE101A)
UEEEL0040: Develop compliance policies and plans to conduct an electrical contracting business
BSBESB402: Establish legal and risk management requirements of small business or approved equivalent (completed within the last three years)
$980.00
Total for the 3 QBP units
Qualified Business Person (QBP): $1695
UEECD0007: Apply Occupational Health and Safety regulations, codes and practices in the workplace, and ** NOTE (previously UEENEEE101A)
UEEEL0040: Develop compliance policies and plans to conduct an electrical contracting business
BSBESB402: Establish legal and risk management requirements of small business or approved equivalent (completed within the last three years)
Fee For Service
QBP
Fee For Service Option 1 – 2-day classroom-based training Option 2 – Blended – Online theory (self-paced) via Learning Management System. Please note course must be completed within 12 months of enrolment.
Blended – Online theory (self-paced) via Learning Management System and 1 day practical training and assessment completed onsite at our campus once all online theory has been completed.
Delivery Location
During the entire program you will have access to your trainer via phone or email during normal business hours, should you have any questions throughout completing the course.
DurationÂ
Up to 12 monthsÂ
Units of Competency
To be awarded this short course, competency must be achieved in 3 units of competency:
WorkSafe Queensland has more information around the requirements to have this endorsement added to an Electrical Contractor Licence.
On successful completion, Statement of Attainment will be issued to enable an Electrical Contractor to nominate QBP on their Queensland Electrical Contractors Licence.
Pre-requisite
There are no pre-requisites for entry into this course.
Resources
Recommended | Access to AS/NZS 3000 (known as the Electrical Wiring Rules); AS/NZS 3018, AS/NZS 3012, AS/NZS 3017, AS/NZS 3019.
Access to a computer/laptop and internet, a video and audio recording device (e.g. smart phone or web cam) and current email address.
It is requested that students provide their own:
These above tools can be provided for use at training if required.
Students must provide their own Australian Standards (Paper or digital formats acceptable) and PPE such as Safety Glasses, Safety Boots and Gloves.
$980.00
Total for the 3 QBP units
Qualified Business Person (QBP): $1695
UEECD0007: Apply Occupational Health and Safety regulations, codes and practices in the workplace, and ** NOTE (previously UEENEEE101A)
UEEEL0040: Develop compliance policies and plans to conduct an electrical contracting business
BSBESB402: Establish legal and risk management requirements of small business or approved equivalent (completed within the last three years)
Up to 12 months
DISCOVER, EXPLORE AND CHOOSE YOUR TRADE PATHWAY WITH OUR NEXT STEP PRE-EMPLOYMENT PROGRAMS. Complete this program and gain: Practical training in...
This qualification fulfils the technical requirements for you to apply for your electrical contractor licence and become a trade-qualified electrician....
The Basic Open Cabler Registration Skill Set is for new or existing workers in the telecommunications industry who wish to...
The Qualified Technical Person (QTP) and Qualified Business Person (QBP) short courses are designed for individuals who are needing to...
The Qualified Technical Person (QTP) short course covers the knowledge and skills to follow work health and safety requirements when...
This Skill Set is designed for those individuals wishing to undertake the testing, tagging and reporting of portable/handheld low voltage...
A Restricted Electrical Licence authorises the holder to perform electrical work of a particular type stated on their licence. This...
The knowledge and skills of many overseas workers can be very high, but there are differences in the way the...
The Certificate III in Electrical Fitting is a Trade-level qualification which provides the knowledge and skills to repair, maintain, assemble,...
The Certificate II in Electrotechnology assists students in gaining the basic knowledge and skills required for the Electrotechnology industry and...
Contact us today to discuss your learning needs and style so we can deliver a course that best meets your needs.
ATTC (Australian Trade Training College) is an MRAEL company, proudly part of IntoWork Australia.
Our college has helped students into fulfilling and sustainable careers since 2006. Our nationally recognised qualifications, led by expert trainers, give you the key to unlock your future across a range of industries including Automotive, Business, Work Health and Safety (WHS), Cookery & Hospitality, Construction, Carpentry & Joinery, Electrotechnology, Engineering and Plumbing. Read more
This is a 3 or 4 digit code that provides extra security for online payments. For Visa, Mastercard and Diners, this is a 3 digit number usually printed on the back of the signature panel. For Amex, this is the 4 digit number on the front of the card above the embossed card number.
